The hello world template app doesn't reset I ran it for a week and never saw it reset, but I reloaded the welcome app and it does reset.
You can see it reset in the welcome app at the end of this video (and you can hear the windows usb disconnect/connect sound)
I will try the boot loader now
I am still not sure there isn't something wrong with it, I have been running the clock app for a few days and it still resets all the time (clock never makes it more than a 1 minute or two) if it is plugged into the USB port, I have tried both a Windows and Linux computer and several different USB cables.
I made a short youtube video to show it resetting. It seems pretty much unusable if it is plugged into the usb port
This doesn't seem normal
Thanks, I thought I had put it into bootloader mode, but it seems to have worked this time. I have loaded a couple of samples and it is no longer rebooting.
My new mono just keeps restarting over and over again when plugged into the USB port.
I have tried it both in a windows box and a linux box.
Can't program it because it keeps reseting. Tried to put it into boot loader mode and that doesn't seem to work either.
Mono device not detected on USB ports.
Make sure that Mono's bootloader is waiting for Host communication.
root@escape:~# dmesg | grep Monolit | wc -l
26
root@escape:~# dmesg | grep Monolit | wc -l
27
root@escape:~# dmesg | grep Monolit | wc -l
28
[255447.046311] usb 2-2: SerialNumber: 0001
[255447.057370] input: Cypress Semiconductor PSoC3 Bootloader as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input44
[255447.057529] hid-generic 0003:04B4:B71D.0023: input,hidraw2: USB HID v1.11 Device [Cypress Semiconductor PSoC3 Bootloader] on usb-0000:00:1d.0-2/input0
[255448.096234] usb 2-2: USB disconnect, device number 50
[255448.348025] usb 2-2: new full-speed USB device number 51 using uhci_hcd
[255448.542349] usb 2-2: New USB device found, idVendor=04b4, idProduct=f232
[255448.542355] usb 2-2: New USB device strings: Mfr=6, Product=7, SerialNumber=128
[255448.542359] usb 2-2: Product: Mono Serial Port
[255448.542362] usb 2-2: Manufacturer: Monolit ApS
[255448.542365] usb 2-2: SerialNumber: 060A09C503113400
Just keeps reseting over and over again.
This doesn't seem normal
Thanks for any suggestions
Dave